Product Information

Agricultural tractor bias tyres are a kind of tyres designed for agricultural machinery, because of their beveled tread, and this design helps to improve the tyre's abrasion resistance and drainage performance, thus adapting to slippery ground conditions. Tractor bias tyres have strong abrasion resistance and good grip, high driving stability, good overload performance, small moment of inertia, good puncture resistance, etc. These tyres are particularly suitable for suitable for agricultural machinery vehicles such as tractors and harvesters and industrial vehicles such as forklifts, especially where they are required to carry large loads and work in poor road conditions and complex terrain.

Product Advantages

1. High load strength.The tread and sidewalls of a tractor bias tyre have greater strength due to the diagonal arrangement of the cord fabric plies, which helps to ensure that the tyre is able to withstand greater loads and pressures during use;

2. Good handling and stability. Tractor bias tyres have a harder tread, which provides better handling and responsiveness on complex terrain surfaces, making it easier for the driver to control the vehicle, which is especially important when the tractor is in operation;

3. Longer service life. Tractor bias tyres have a simpler structure that makes them easier to repair and replace, which helps to reduce the cost of use and thus extend the life of the tyre;

4. High skid resistance and durability. As the tread design of tractor bias tyres improves the friction between the tyre and the ground, thus enhancing anti-skid performance and improving driving safety. At the same time, its special structural design makes the tyre have good durability performance and can withstand long time use;

5. Strong adaptability. The structure of tractor bias tyres allows them to show better stability and comfort when adapting to uneven road surfaces, which is particularly important for vehicles that need to work on a variety of terrains, such as tractors.

Product Specifications

AB100 Size	Ply Rating	Speed Rating	Type	Patter Code	Sectio Width (mm)	Overall Diameter (mm)	Maximu Speed (km/h)	Inflation Pressure (kPa)	Maximum Load (kg)	Standard Rim	Tread Depth (mm)
5.00-12	6	A8	TT	AB100	145	590	40	270	280	4.00E	24.0
6.00-12	6	A8	TT	AB100	165	640	40	250	325	4.50E	24.0
6.00-16	6	A8	TT	AB100	165	745	40	250	395	4.50E	28.0
6.50-16	6	A8	TT	AB100	180	765	40	250	450	5.00F	25.0
6.5-20	6	A8	TT	AB100	180	865	40	310	580	5.00F	25.0
6.5-20	8	A8	TT	AB100	180	865	40	420	690	5.00F	25.0
7.00-12	6	A8	TT	AB100	190	680	40	250	360	5.00F	26.0
7.50-16	8	A8	TT	AB100	205	810	40	280	615	5.50F	26.0
8.3-20	8	A8	TT	AB100	210	895	40	310	680	W7	32.0
8.3-24	6	A8	TT	AB100	210	995	40	240	720	W7	30.0
8.3-24	8	A8	TT	AB100	210	995	40	320	850	W7	30.0
9.5-24	6	A8	TT	AB100	240	1050	40	210	750	W8	30.0
9.5-28	8	A8	TT	AB100	240	1140	40	280	950	W8	33.0
11.2-24	6	A8	TT	AB100	285	1105	40	180	840	W10	35.0
11.2-24	8	A8	TT	AB100	285	1105	40	240	980	W10	35.0
11.2-24	10	A8	TT	AB100	285	1105	40	300	1100	W10	35.0
12-38	8	A8	TT	AB100	330	1575	40	220	1600	W11	38.0
12-38	12	A8	TT	AB100	330	1575	40	260	1760	W11	38.0
12-38	14	A8	TT	AB100	330	1575	40	390	2180	W11	38.0
12.4-24	10	A8	TT	AB100	315	1160	40	290	1310	W11	36.0
12.4-24	12	A8	TT	AB100	315	1160	40	330	1420	W11	36.0
12.4-28	6	A8	TT	AB100	315	1260	40	170	1020	W11	36.0
12.4-28	8	A8	TT	AB100	315	1260	40	230	1360	W11	36.0
12.4-28	10	A8	TT	AB100	315	1260	40	290	1570	W11	36.0
12.4(11)-32	10	A8	TT	AB100	315	1360	40	280	1440	W11	36.0
13.6-16	12	A6	TT	AB100	290	870	30	280	1350	W10	23.0
13.6-20	10	A8	TT	AB100	280	980	40	280	1200	W8L	25.0
13.6-28	10	A8	TT	AB100	345	1310	40	250	1700	W12	37.0
13.6-38	8	A8	TT	AB100	345	1565	40	200	1950	W12	37.0
13.6-38	10	A8	TT	AB100	345	1565	40	250	2120	W12	37.0
14.9-24	8	A8	TT	AB100	380	1265	40	180	1600	W13	38.0
14.9-24	10	A8	TT	AB100	380	1265	40	220	1800	W13	38.0
14.9-24	12	A8	TT	AB100	380	1265	40	260	2000	W13	38.0
14.9-26	10	A8	TT	AB100	378	1315	40	220	1850	W13	36.0
14.9-26	12	A8	TT	AB100	378	1315	40	275	2310	W13	36.0
14.9-28	10	A8	TT	AB100	380	1365	40	220	1900	W13	38.0
14.9-28	12	A8	TT	AB100	380	1365	40	270	2100	W13	38.0
14.9-30	10	A8	TT	AB100	378	1415	40	220	1950	W13	38.0
15-24	10	A8	TT	AB100	410	1330	40	280	2240	W14	33.0
15-24	12	A8	TT	AB100	410	1330	40	335	2490	W14	33.0
15-24	14	A8	TT	AB100	410	1330	40	390	2730	W14	33.0
16.9-24	8	A8	TT	AB100	430	1335	40	170	1630	W15L	39.0
16.9-24	10	A8	TT	AB100	430	1335	40	200	1785	W15L	39.0
16.9-28	10	A8	TT	AB100	430	1435	40	170	1950	W15L	39.0
16.9-30	8	A8	TT	AB100	430	1485	40	170	2000	W15L	40.0
16.9-30	10	A8	TT	AB100	430	1485	40	190	2240	W15L	40.0
16.9-30	12	A8	TT	AB100	430	1485	40	230	2500	W15L	40.0

R-1S Size	Ply Rating	Speed Rating	Type	Patter Code	Section Width (mm)	Overall Diameter (mm)	MaximumSpeed (km/h)	Inflation Pressure (kPa)	Maximum Load (kg)	Standard Rim	Tread Depth (mm)
6.00-16	6	A6	TT	R-1S	165	745	30	250	495	4.50E	24.0
6.00-16	8	A6	TT	R-1S	165	745	30	360	550	4.50E	24.0
6.50-16	6	A6	TT	R-1S	180	765	30	250	565	5.00F	25.0
7.50-16	6	A6	TT	R-1S	205	810	30	210	650	5.50F	25.0
7.50-16	8	A6	TT	R-1S	205	810	30	280	770	5.50F	25.0
8.3-20	8	A6	TT	R-1S	210	895	30	310	850	W7	28.0
8.3-24	8	A6	TT	R-1S	211	993	30	320	960	W7	28.0
9.5-20	8	A6	TT	R-1S	240	950	30	280	955	W8	31.5
9.5-24	8	A6	TT	R-1S	240	1050	30	280	1110	W8	33.0
9.5-28	8	A8	TT	R-1S	240	1140	40	280	1060	W10	33.0
9.5-32	8	A8	TT	R-1S	241	1251	40	280	1008	W8	33.0
9.5-32	10	A8	TT	R-1S	241	1251	40	350	1130	W8	33.0
9.5-48	16	A8	TT	R-1S	240	1655	40	400	1535	W8	33.0
11-32	10	A8	TT	R-1S	305	1360	40	240	1095	W10	35.0
11-32	12	A8	TT	R-1S	305	1360	40	290	1225	W10	35.0
11.2-24	8	A6	TT	R-1S	285	1105	30	240	1225	W10	35.5
11.2-24	10	A6	TT	R-1S	285	1105	30	300	1380	W10	35.5
11.2-28	8	A8	TT	R-1S	285	1205	40	240	1180	W10	35.0
11.2-38	12	A8	TT	R-1S	284	1459	40	340	1750	W10	35.0
12.4-24	8	A6	TT	R-1S	315	1160	30	230	1415	W11	37.0
12.4-24	10	A6	TT	R-1S	315	1160	30	280	1600	W11	37.0
12.4-24	12	A8	TT	R-1S	315	1160	40	330	1600	W11	37.0
12.4-28	8	A8	TT	R-1S	315	1260	40	220	1320	W11	36.0
12.4-28	10	A8	TT	R-1S	315	1260	40	280	1550	W11	36.0
12.4-36	12	A8	TL	R-1S	315	1464	40	330	1950	W11	36.0
12.4-48	12	A8	TT	R-1S	315	1760	40	320	2650	W11	36.0
12.4-48	14	A8	TT	R-1S	315	1760	40	400	3000	W11	36.0
12.4-54	12	A8	TL	R-1S	315	1921	40	310	2560	W11	36.0
13.6-24	10	A8	TT	R-1S	345	1210	40	240	1615	W12	37.0
13.6-28	8	A8	TT	R-1S	345	1310	40	190	1500	W12	37.0
13.6-28	10	A8	TT	R-1S	345	1310	40	250	1700	W12	37.0
14.9-24	10	A8	TT	R-1S	378	1265	40	220	1800	W13	38.0
14.9-26	10	A8	TT	R-1S	378	1316	40	220	1850	W13	38.0
14.9-26	12	A8	TT	R-1S	378	1316	40	270	2080	W13	38.0
14.9-28	10	A8	TT	R-1S	378	1365	40	220	1900	W13	38.0
14.9-28	12	A8	TT	R-1S	378	1365	40	270	2100	W13	38.0
14.9-30	10	A8	TT	R-1S	378	1415	40	220	1950	W13	38.0
14.9-48	12	A8	TT	R-1S	378	1875	40	270	3350	W13	38.0
15-24	10	A6	TT	R-1S	410	1330	30	280	2800	W14	39.0
16.9-24	10	A8	TT	R-1S	430	1335	40	190	2000	W15L	39.0
16.9-24	12	A8	TT	R-1S	430	1335	40	230	2250	W15L	39.0
16.9-28	10	A8	TT	R-1S	430	1435	40	190	2120	W15L	39.0
16.9-28	14	A8	TT	R-1S	430	1435	40	290	2980	W15L	39.0
16.9-30	10	A8	TT	R-1S	430	1485	40	190	2240	W15L	39.0
16.9-30	12	A8	TT	R-1S	430	1485	40	230	2500	W15L	39.0
16.9-30	14	A8	TT	R-1S	430	1485	40	280	2725	W15L	39.0
16.9-34	10	A8	TT	R-1S	430	1585	40	190	2360	W15L	39.0
18.4-26	10	A8	TT	R-1S	467	1450	40	180	2360	DW16	41.5
18.4-26	12	A8	TT	R-1S	467	1450	40	220	2650	DW16	41.5

Related Tyre Knowledge

● Agricultural tyres are defined as tyres that are specifically used for agricultural machinery and are resistant to abrasion, punctures, high temperatures and other characteristics. According to the tyre carcass structure and purpose, agricultural tyres can be classified into agricultural radial tyres, agricultural bias tyres, agricultural implement tyres and agricultural construction machinery tyres. These tyres are designed to adapt to a variety of terrains, such as mud, sand, dry fields, paddy fields, etc., and are used on agricultural machinery, such as tractors, harvesters, etc..

● Agricultural bias tyres, also known as general structure tyres, are pneumatic tyres in which the adjacent layers of the cords of the carcass cord and cushion plies cross and are arranged at an angle of less than 90° to the centerline of the tread. Their characteristics of good longitudinal rigidity, good stability, stable support and good wear resistance and good load-carrying capacity have made them widely used on agricultural vehicles, especially where they are required to adapt to complex terrain and provide good grip.

Hot Tags: tractor bias tyre, China tractor bias tyre manufacturers, suppliers, irrigation machine tyre, tractor bias tyre, harvester bias tyre, paddy tyre, sand tyre, baler tyre

Previous: Harvester Bias Tyre

Next: No Information